Andrew Mercer
on this page

Several telephone and network connectors look almost the same. Plugging the wrong one in (or forcing it) can damage the jack, so it's worth knowing which is which.

The modular connectors

Modular connectors are named by positions (P, slots in the plug) and contacts (C, metal pins actually fitted). The "RJ" names are the common, loosely used labels.

Common name Formal name Width Used for
RJ45 8P8C Widest (about 11.7 mm) Ethernet network cables
RJ11 (also RJ14) 6P2C / 6P4C Medium (about 9.6 mm) Telephone line cords: wall jack, ATA phone port, phone base
"RJ9" / "RJ22" 4P4C Narrowest (about 7.7 mm) Coiled handset cords, some headset jacks

How they fit together:

  • An RJ11 plug fits into an RJ45 jack (loosely, and it shouldn't be used that way), but an RJ45 plug does not fit an RJ11 jack.
  • Neither an RJ11 nor an RJ45 plug fits a 4P4C handset jack. If a jack looks like a phone jack but nothing fits, it's almost certainly a 4P4C handset or headset jack.

On an ATA such as the Grandstream HT812:

  • Phone 1 / Phone 2 are RJ11 ports. The phone's line cord goes here.
  • NET1 / NET2 are RJ45 ports. NET1 (internet/WAN) connects to the home router.

Older connectors

  • Hardwired: many vintage phones have a line cord wired directly into a wall box, with no plug at all.
  • 4-prong plug: a large round-ish plug with four pins, common on Canadian and U.S. phones before modular jacks (1970s and earlier). Adapters and conversion kits to RJ11 are cheap and easy to find.
  • Converting a vintage phone to an RJ11 modular line cord is a simple, common restoration job (see Using a rotary phone today).

Cordless phones: base station vs charger cradle

A cordless phone system has two kinds of cradles that look similar:

Base station Extra-handset charger
Power jack Yes Yes
Telephone line jack (RJ11) Yes, often marked TEL LINE or with a phone symbol No
Connects to the phone line or ATA Yes No; it only charges a handset
How the handset reaches the line Directly Wirelessly, through the base station

An extra-handset charger can't be connected to an ATA or a wall jack. Its handset only works when it's paired with a matching base station from the same product series. If a charger has a small jack that no line cord fits, it's a handset or headset jack, not a line jack.

To identify what you have, check the model number on the label underneath. Add-on handset kits usually have a separate model number from the base station system they expand.

Sources